Accessing-the-Admin-Panel
|
Pristine Internet |
Katalyst Spark · Guide 3 of 5 |
How to Access Your Admin Panel
Katalyst Spark — Setup Guide
The admin panel at 192.168.8.1 is your control center for the Katalyst Spark. From here you can check your connection, change your Wi-Fi settings, and manage your device. Here's how to get in.
Before You Start — Find Your Login Info
Your username and password are printed on a label sticker on the bottom of your Spark.
|
Username |
root |
This is always the same for all Spark devices |
|
Password |
Last 8 digits of your Serial Number |
Printed on the label as "S/N" or "Serial Number" |
Device label on the bottom of the Spark — locate the Serial Number (S/N) and use the last 8 digits as your password
Logging In — Step by Step
|
1 |
Connect to your Spark Wi-Fi. Make sure your phone, tablet, or computer is connected to your Katalyst Spark Wi-Fi network (KAT-XXXX or KAT-XXXX-5G). You can also connect using an Ethernet cable plugged into the LAN port. |
|
2 |
Open a web browser. Open any web browser (Chrome, Safari, Edge, Firefox, etc.). |
|
3 |
Type in the address. In the address bar at the top, type: 192.168.8.1 and press Enter. You will see the Spark login page. |
|
4 |
Enter your credentials. Username: root — Password: the last 8 digits of your Serial Number (from the label on the bottom of the device). |
|
5 |
Click Login. You'll be taken to the Internet dashboard where you can see your connection status, SIM info, and signal strength. |
The Spark login page at 192.168.8.1 — enter your credentials and click Login
The Internet dashboard — your home screen after logging in. Shows your carrier, SIM, IP address, and connection status.
Can't Reach 192.168.8.1?
|
💡 Tip: To access the admin panel, your device must be connected to the Spark's Wi-Fi or Ethernet — not another network. The admin panel is only reachable from within the Spark's own network. |
Mobile data interference: This is a less common but important issue — if your Spark has no internet connection and you are trying to access the admin panel from a smartphone; your phone may automatically switch to your cellular carrier's data network instead of staying on the Spark's Wi-Fi. When this happens, your phone can no longer reach 192.168.8.1 because it is no longer on the Spark's network.
To fix this: Turn off Mobile Data (cellular data) on your phone before trying to access 192.168.8.1. This forces your phone to stay on the Spark's Wi-Fi network. Once you are done in the admin panel, you can turn mobile data back on.
• On iPhone: Settings → Cellular → turn off Cellular Data
• On Android: Settings → Network & Internet → turn off Mobile Data
Need more help?
Visit pristineinternet.com · Call 1-877-877-7716 · Email contact@pristineinternet.com
Pristine Internet — Katalyst Spark Customer Guide